Essential Design Techniques From the Workbench of a Pro

Harness the power of the PIC microcontroller unit with practical, common-sense instruction from an engineering expert. Through eight real-world projects, clear illustrations, and detailed schematics, Making PIC Microcontroller Instruments and Controllers shows you, step-by-step, how to design and build versatile PIC-based devices. Configure all necessary hardware and software, read input voltages, work with control pulses, interface with peripherals, and debug your results. You’ll also get valuable appendices covering technical terms, abbreviations, and a list of sample programs available online.

• Build a tachometer that gathers, processes, and displays data 
• Make accurate metronomes using internal PIC timers
• Construct an asynchronous pulse counter that tracks marbles
• Read temperature information through an analog-to-digital converter
• Use a gravity sensor and servos to control the position of a table
• Assemble an eight-point touch screen with an input scanning routine
• Engineer an adjustable, programmable single-point controller
• Capture, log, monitor, and store data from a solar collector

Customers Who Bought This Item Also Bought

1. The PIC Microcontroller: Your Personal Introductory Course, Third Edition
2. Thames & Kosmos Microcontroller
3. Analog and Digital Circuits for Electronic Control System Applications: Using the TI MSP430 Microcontroller
4. MSP430 Microcontroller Basics
5. Advanced PIC Microcontroller Projects in C: From USB to RTOS with the PIC 18F Series

4 Responses to “Making PIC Microcontroller Instruments and Controllers”

1. Z. Tokarczyk says:

   February 11, 2010 at 12:00 am

   I bought the Book thinking that it would have some assembly programming in it. It is pretty much all PICBasic and PICBasic PRO. I bought the Know-it-all Book as well, and I would say just get the Know-it-all book instead. there are a few helpful examples in this book but I don’t think its good for you unless you are looking to expand on Basic.

   Reply
2. Harprit S. Sandhu says:

   December 2, 2009 at 12:00 am

   My thanks to Mr Kirby for his kind comments.

   The book does contain a very detailed explanation on how to read 4×4 keyboard that Mr. Kirby seems to have missed. See pages 67 to 74.

   It is not necessary to buy the entire development system used in the book. Most of the work can be done with a breadboard and stuff in an adequate junk box but it does make it much easier to have a formal system to work with. A programmer can be purchased or made from any of many designs on the internet. I did not make one, so I do not make a recommendation.

   HSS (Author)

   Reply
3. J. KIRBY says:

   November 26, 2009 at 12:00 am

   Most authors complicate things by trying to cover too much. Mr Sanduh keeps it short (350 pages) and simple, but is very thorough. He sticks to the 40-pin 16F877A, using Picbasic Pro and the LAB-X1 demo board, both from melabs.

   The style is friendly, readable and interesting. All major topics are dealt with using practical examples.

   I now think BasicPro is the easiest way to program PIC devices, and this book is an excellent fast track to using PIC technology.

   I originally missed the section on keyads. It is not in the index, but it is fine. My apologies to Mr Sandhu.

   Reply
4. S. Sandhu says:

   November 10, 2009 at 12:00 am

   Mr. Sandhu has authored a well-written, easily understandable book covering a complex subject with ease.

   To his credit, in-depth coverage of the PIC chip he has selected as a basis for the published projects is thankfully brief. Readers who purchase this book should have a reasonable amount of experience in the PIC range already, and will be pleased to discover that this book is NOT a rehash of already published data sheets and chip-specific information.

   Mr. Sandhu has a refreshingly clear writing style, making a complex subject easy to understand. The book assumes the reader will have access to a development board (the LAB-X1) and is using PICBasic (from Micro Engineering Labs). However, these prerequisites are not essential to the reader’s enjoyment of the book. In all cases, schematics of the projects are supplied for the reader to construct, or breadboard. A trial version of the software is available.

   Instrumentation and controllers are necessary in all walks of life. Home, industry, agriculture and so on. For many years, these devices have been a `dark art’, with potential users resorting to purchasing units to satisfy their instrument and/or controller needs, often being forced into a compromise situation due to exact requirements not being available in commercial equipment. No more. Mr. Sandhu supplies a wealth of information, clear instructions and employs a `universal’ approach to his examples. This approach gives the reader wide scope to modify the published designs to suit their own requirements.

   I have learned a huge amount from reading this book. It has filled a void in my PIC knowledge, demystifying instrumentation and control, and empowering me to confidently apply lessons learned from the book to real-world applications that are required for my particular industry.

   Mr. Sandhu’s clear writing style, succinct but clear explanations of very technical concepts, and wry humor make a serious subject a joy to read about and gives the reader a large dose of confidence. So much so that I acquired a LAB-X1 development board and immediately began developing embedded control and instrumentation equipment with considerable success.

   Mr. Sandhu is to be commended for his writing skill, for the time he has obviously put into his work and for his approachability.

   Well done, sir!

   Reply